Anbieter: Treedix Official

5-12V ZVS Low Voltage Induction Heating Power Supply Module with Coil Power Supply Heating Power Supply Module

7,80 €12,99 €39% OFF
Menge

Beschreibung

Features:
· ZVS heating Power Source module, with heating coil included. The heating coil can be soldered onto the PCB.
· Input Voltage：DC 5V~12V(This voltage range is the voltage during operation, not the voltage when the power supply is unloaded).
· The width of the object to be heated should be between 1/3 and 1/2 of the inner diameter of the heating coil, and it should not exceed 2/3.
· Ensure all the components welding right, power line connected in the right way, then to set up an electric circuit.
· The current / voltage is directly linked to what you're heating.

Specification:

1. Input voltage: DC 5V to 12V

2. Circuit board size: 55*37*1.6mm

3. Maximum power: 120W

Package Included:

1*ZVS heating power module

1*Heating coil

When inductive heating, usually work for 5 minutes to power off cooling. Because the current is relatively large during induction heating, the coil heat is also relatively large. When heating, part of the heat generated by the heated object is transmitted to the heating coil. For a long time, the temperature of the heating coil is high. If the heating coil is connected to the terminal, the plastic part of the terminal will be melted. Therefore, when induction heating, it is best to solder the heating coil directly to the PCB.

You can check whether the blue LED indicator light up to see if the power is supplied or the module can functionally work. When the indicator is dim, maybe the power supply is insufficient, should use a higher power supply. Just make sure the power supply is within DC 5-12V.

Operation: heating coil, the width of the heated objects as far as possible between the heating coil diameter of 1/3 ~ 1/2, most don't more than two-thirds.The diameter of the heated object should be controlled within 20mm as far as possible.

Confirm that all components are welded correctly, and the positive and negative power cords are not reversed. After connecting the load (heating coil, high-voltage package), turn on the power again! No power on without load! No-load power on is easy to damage!
Read more